Can you virtually prototype an #IoT platform for a smart, connected product with a #DigitalTwin? That’s the topic Chad Jackson takes on in our latest video.
Archive for the ‘IoT Engineering’ Category
At PTC’s Liveworx back in June, a group of companies that had deployed IoT initiatives came together for a panel. I was keen to hear their advice on what to do what not to do when pursuing an IoT effort. This post summarizes my biggest takeaways.
There’s lots of confusion around the Digital Twin. In this post and video, provide an overview of the three definitions used in the industry and highlight the one we use.
Before we dive into virtual sensors, we need to cover some foundational concepts around the Digital Twin. With this technology, you have sensory data that you’re capturing from a product, and you’re feeding it into a simulation. The simulation will be running very fast, and will often be a systems simulation; a 1D simulation that
Most folks pair up the concepts of Digital Twins and the Internet of Things. But are they truly exclusively together? In this post, we find they’re not by looking at an MSC Software offering applied to drilling heads.
People have been feeding sensor data to simulations for years. How are Digital Twins different? This post explains the key difference between the two scenarios and where companies
Many companies are going through the transition from developing mechanically oriented products to smart, connected ones. Overall, that transition includes a sea of changes, many of them challenging. This includes adding the organizational capability to develop embedded code, electrical systems, or rigid-flex electronics. One of the easier adjustments, however, is implementing an Internet of Things
This article reviews how the PTC Digital Twin, created with Integrity Modeler, SySim, and Thingworx, can digitally prototype a smart, connected product and its IoT platform during the design cycle.