Mechanical Design

Has PLM Been Misdirected All This Time Around?

Deploying PLM. I know few technical champions that face the prospect of starting a PLM deployment with earnest joy. Mostly, that’s because it can be a long, hard slog. According to posts like this one there are fundamental pieces of PLM that you really need to put in place before you get into more advanced capabilities of PLM. Concurrent Engineering, a PTC reseller and author of the blog post above, is by no means alone. You’ll find such posts on the basics, foundation or fundamentals of PLM all over the place. This view has been in place for years now.

The 360° View: Siemens PLM to Acquire LMS Worldwide

[See the story “The 360&deg View: Siemens PLM to get LMS Worldwide” on Storify]

The 360&deg View: Siemens PLM to get LMS Worldwide

My expectation is the fact that Imagine.Lab programs is going to be stand alone choices, while Virtual.Lab and SamTech programs will probably be folded into NX. I additionally expect the exam choices to continue being stand alone choices.

Storified by Chad Jackson &middot Thu, November 08 2012 10:33:26 The State Word Today, Siemens PLM introduced their in…

Do Engineers Use CAD? It’s Still a Major Debate

Do you browse LinkedIn? No seriously. I know that many years ago, LinkedIn was basically a place to post your online resume. But a couple years ago, they came out with professional groups where folks could discuss career and other work topics. Then they came out with a more newspaper-like view of your connections’ updates. Now it’s fairly easy to traverse and read good articles. Anyway, the other day I was looking through some articles in my connections’ and groups’ feeds when I came across one that resonated with me. Its title is… Engineers as Draftsman, my how times have changed… in the Mechanical Design Forum. Here’s a original post.

Engineering-less PLM?

Back in September, Yoann Maingon over at Minerva, an Aras reseller, wrote a blog post that got my attention:Stop Starting PLM from Engineering!!! The gist of the post boils down to this excerpt. Start your implementation’s phase 1 out(side) of engineering and you’ll get live much faster. These people need integrated systems and their processes are more stable then in engineering. As you can see, it’s another traditional perspective on… wait… what?

3D CAD Model Earth Mover Wireframe

The Success of Spaceclaim: An Tale of Granularity for CAD?

Remember when Direct Modeling was rare. Seriously, more than five years ago, the modeling approach was pretty much relegated to being delivered to market by much smaller software providers. I’ll never forget a conversation I had with a head of product management at one of the largest CAD software providers. “That war was fought, and feature-based modeling won a long time ago”, he had said to me.

What is Product Data Management (PDM)?

Can Siemens PLM’s Insight XT Succeed where PTC’s ProductPoint Failed?

Back in June, I attended PLM Connections, the user event for Siemens PLM, in Las Vegas. Of course, there were a lot of product updates and announcements over the course of the conference. But there was one that caught my eye. The mainstream engineering folks at Siemens PLM (formerly Velocity Series) made some announcements about Insight XT, a PDM-like system that sits on top of SharePoint. They talked about numerous new enhancements to the product.

Simulation CFD Helicopter Pump

NAFEMs 2012: Lessons Learned from Four SPDM Tales

I had talked with Michelle Ringrose of NAFEMs on what they needed, and the answer was measuring the value of simulation. That fit in pretty well with some research I had been planning on conducting on the ‘Value of Simulation.’

Autodesk + Inforbix = What?

Was anyone surprised that Autodesk acquired Inforbix? Well, actually, I was. Not that I didn’t think that Inforbix would be acquired. They seemed to be gaining traction in the market. And frankly, with Oleg as a loud and prominent evangelist, the concept and message behind Inforbix was getting out.

3D CAD Model Gears and Bushings

Where the Interoperability Movement Falls Flat

Ah, interoperability. A lot of changed over the course of the last few years. The CAD industry has become reinvigorated. 3D visualization seems to have become more focused on applications as opposed to just cool technology. PLM systems have started to become mainstream while more granular systems have simultaneously emerged. And despite all that change, at least one thing has been very consistent.