I have always wondered if any advantage that CAD provides to the simulation process could be quantified. Naturally, one would assume that CAD does, in fact, offer some value to simulation efforts. But to my knowledge, that has never been verified. In an effort to solve this mystery, I included several questions on this topic as part of my 2013 Simulation Driven Design study. Read on for some answers.
Context of the Questions
Before I get into the statistics, it’s important that you understand the questions. Here is some information about the two most relevant ones:
- The first asked which combinations of CAD and CAE software were used to conduct simulations. It was a multiple-choice question, and many respondents selected multiple answers.
- The second asked how many hours, on average, users spent on different simulation tasks. The findings here focus on the preparation tasks for the simulation.
The results here represent over 1,005 total respondents:
What stands out to you?
For me, it’s the shift. Respondents conducting simulations completely — meaning from beginning to end — in CAD software spend less time on these three tasks. Their answers in the charts above are shifted left overall when compared to those not conducting simulations in CAD from beginning to end. Overall, those relying on CAD for simulation spend a lot less time on these preparation tasks. Some of the differences between these two groups in the findings are significant, especially when it comes to meshing the simulation model and applying loads and boundary conditions.
Those are the statistical facts from the study. Now we need to talk about why there is a difference.
One Answer: Technology
There are a few good reasons why conducting simulations from beginning to end in CAD software can be faster.
- From a geometry preparation perspective, CAD obviously has advantages over simulation software. Those advantages have only grown in the past few years as direct modeling functionality has become more prevalent in CAD applications.
- Automatic meshers have made significant progress over the past decade. They are now at the point where many simpler finite element analysis (FEA) jobs are relatively hands free from a meshing perspective. In fact, in some CAD applications where you conduct simulation, you may never even actually see a mesh.
- In CAD-embedded simulation tools, most loads and boundary conditions are applied to geometry instead of the elements themselves. The elements associated with that geometry then inherit those loads and boundary conditions.
So, yes, I’m confident that these technology advances have a positive impact on the ability to conduct simulations faster. But there’s probably another influence at play here.
Another Answer: Simpler Simulations
It would be fair to argue that those using CAD-embedded simulation tools are likely casual users who conduct simulation every once in a while. Furthermore, they are more likely to conduct directional simulations to compare two or more design alternatives. All of these points speak to relatively low simulation complexity.
Conversely, those using standalone simulation tools are more likely to be dedicated users focusing on much more complex simulations. In verification and validation scenarios, such simulations need to be very accurate.
Overall, those using CAD-embedded simulation tools may be working on simpler simulations. Those using standalone simulations are working on more complex simulations that require accuracy. The tool being used may well hint at the difference each kind of simulation requires in terms of time.
So, what does it all mean? Basically, the preparation of simulations conducted via CAD software is completed more quickly. And actually, that theme carries throughout all of the simulation tasks. The implication here is that more simulations can be conducted in the same amount of time. That means designers and engineers gain more insight. That, in turn, leads to better design decisions.
Recap and Questions
Findings from the 2013 Simulation Driven Design study show that those preparing their simulations in CAD software spend less time on each task. One potential driver of that fact is technology, where advancements in CAD and simulation technology have made it easier to prepare geometry, mesh the model and apply loads and boundary conditions. Additionally, the simulations being conducted via CAD-embedded simulation software are likely simpler, and thus, completed more quickly. In all, it means designers and engineers can conduct more simulations in the same amount of time.
Ready for questions? Which do you think is a bigger influence on faster simulations in CAD-embedded CAE software? Would love to hear everyone’s thoughts.
Take care. Talk soon. Thanks for reading.
This blog post has been licensed for hosting by PTC. The concepts, ideas and positions of this post have been developed independently by Industry Analyst Chad Jackson of Lifecycle Insights. 2013-2014 © LC Insights LLC